奧林巴斯DLHT-1標準延遲塊；奧林巴斯DLHT-1高溫延遲塊，奧林巴斯DLHT-1延遲塊；奧林巴斯DLHT-1**代理；奧林巴斯DLHT-1價格優惠；奧林巴斯DLHT-1銷售專線13530838910

DLHT-1奧林巴斯DLHT-1高溫延遲塊

DLHT-1奧林巴斯DLHT-1高溫延遲塊

DLHT-1奧林巴斯DLHT-1高溫延遲塊

DLHT-1奧林巴斯DLHT-1高溫延遲塊

DLHT-1奧林巴斯DLHT-1高溫延遲塊

可更換延遲塊探頭

可更換延遲塊探頭是一款單晶Videoscan探頭，其外殼可連接一條可更換延遲線。

Advantages:

• Heavily damped transducer combined with the use of a delay line provides excellent near surface resolution
• Higher transducer frequency improves resolution
• Improves the ability to measure thin materials or find small flaws while using the direct contact method
• Contouring available to fit curved parts

Applications:

• Precision thickness gaging
• Straight beam flaw detection
• Inspection of parts with limited contact areas
• Replaceable Delay Line Transducers
• Each transducer comes with a standard delay line and retaining ring
• High temperature and dry couple delay lines are available
• Requires couplant between transducer and delay line tip

Delay Line Transducers

Replaceable Delay Line Options 

Sonopen® Replaceable Delay Line Transducer

• Focused replaceable delay line
• Extremely small tip diameter may improve performance on curved surfaces and small indentations
• Handle for easier positioning of transducer head

Harisonic Pencil Transducers

These high frequency, focused delay line transducers are compatible with any ultrasonic instrument capable of displaying a return echo at depths as low as .010 inches in steel. The typical range is approximately from .010 inches to 0.250 inches in steel. The 0.060 inches circular contact face enables readings to be taken on curved surfaces. Typical applications for these transducers include the inspection of turbine blades, small diameter tubing and concave areas in small parts. Both transducers utilize replaceable delay tips. For best performance, a short cable (such as MB type, 6') should be used. These models, indicated by a part number ending with an "L", incorporate PowerLink? Technology to assure optimal performance when used with a Sonic ultrasonic instrument. 

The HC-876 ultrasonic transducer operates at high frequency (20 MHz) with a broad bandwidth and small contact surface. Its chief application is thickness measuring of critical components such as jet engine blades. It is fitted with a Microdot connector.

HC-398-RDL-L Straight Handle

HC-398-RA-RDL-L Right Angle Handle

HC-876-L Straight Handle

HC-876-RA-L Right Angle Handle

HC-876*Right Angle Handle

Permanent Delay Line Transducers with Handle Assembly

These transducers are used to reach into areas of limited access such as adjacent turbine blades. The swivel head improves contact in tight areas. 

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!