35RDC復合材料損傷檢測
公司名稱：深圳華清儀器儀表有限公司
公司電話：、
公司傳真：0755－
專線電話：
Q Q :
公司地址：深圳市龍華新區三聯路清泉二期15A2
公司網址:http://www.huaqing17.cn
35RDC Composite Damage Checker
35rdc復合材料損傷檢測
The 35RDC is a simple Go/No-Go ultrasonic gage designed to detect subsurface defects caused by impact damage on aircraft composite structures. Features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage.
The 35RDC is a simple Go/No-Go ultrasonic gage designed to detect subsurface defects caused by impact damage on aircraft composite structures. Features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage.
該35rdc是一個簡單的GO /無超聲波探傷儀用來檢測表面缺陷對飛機復合材料結構的影響造成的損害。功能背光液晶顯示的字好如果沒有地下發現損壞或詞不好當它檢測到的亞表面損傷。
概覽
The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. It uses an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training.
手持35rdc是一個簡單的GO /無超聲儀器檢測地下的缺陷，通過對固體復合飛機復合材料結構沖擊損傷引起的。該35rdc功能背光液晶顯示的字好如果沒有地下發現損壞或詞不好當它檢測到的亞表面損傷。它使用一個超聲波換能器，可放置或對復合材料的沖擊損傷疑似掃描的區域。重量只有0.24公斤（8.5盎司）和具有一個簡化的鍵盤，這崎嶇的超聲儀器操作簡單，需要*少的培訓。
Features
· For use on solid laminate structure aerospace composites
· Simple one-button calibration
· Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
· Simple Good/Bad/Beyond Cal display readout
· Back light matrix display with user help text
· AA battery operation
· Handheld, weighing only 0.24 Kg (8.5 oz.)
· Energy saving Auto Power off feature
· Long battery life, 150 hours typical
· Battery life indicator
特征
?For use on solid laminate structure aerospace composites
在堅實的疊層結構，航空航天復合材料使用?
?Simple one-button calibration
?簡單的一鍵校準
?Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
?厚度范圍為0.63毫米至22.8毫米（0.025。0.900。）
?Simple Good/Bad/Beyond Cal display readout
?簡單好的/壞的/在加州顯示讀數
?Back light matrix display with user help text
?背光矩陣顯示用戶幫助文本
?AA battery operation
?AA電池操作
?Handheld, weighing only 0.24 Kg (8.5 oz.)
?手持式，重量只有0.24公斤（8.5盎司）
?Energy saving Auto Power off feature
?節能自動關機功能
?Long battery life, 150 hours typical
?電池壽命長，150小時的典型
?Battery life indicator
?電池壽命指標
技術規格
35RDC Specifications*
Display Modes
· Digital Readout Good, Bad or Beyond CAL thickness
· Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only.
Thickness Measurement Range**:
0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
** Thickness range depends on material, transducer, and surface conditions.
Material Velocity: Fixed velocity for carbon fiber aerospace composite
Transducer Frequency: 5.0 MHz
Measurement Update Rate: 20 Hz
Deviation alarm set points: Programmable +/- from calibration point. Set in advance setup
Power Supply
Battery: 3 AA alkaline or NiMH batteries
Operating Time: 150 hours typical battery life; 30 hours continuous with backlight on
Low Battery Indicator: Continuously indicates battery status
Battery Saver: Auto Power Off/Continuous On
AC Power Supply: Optional
General
Environmental IP65 compliant: Splash-proof, impact-resistant case. Sealed, color-coded keypad
Operating Temperature Range: -10° C to +50° C (+14° F to 122° F)
Size: (W x L x H)
84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)
Weight: 0.24 kg (8.5 oz)
Standard Inclusions
Wrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty
Optional Accessories
USB/ADP-115: AC-115 power supply
USB/ADP-230: AC-230 power supply
*All specifications are subject to change without notice.
技術規格
35RDC Specifications*
35rdc規格*
Display Modes
顯示模式
?Digital Readout Good, Bad or Beyond CAL thickness
?數字讀出的好，壞或超出計算厚度
?Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only.
?**用戶設置顯示A型或波形。使用合格的無損檢測人員。
Thickness Measurement Range**:
厚度測量的范圍*：
0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
0.63毫米至22.8毫米（0.025。0.900。）
** Thickness range depends on material, transducer, and surface conditions.
*厚度范圍取決于材料，傳感器，和表面條件。
Material Velocity: Fixed velocity for carbon fiber aerospace composite
碳纖維材料的速度：航空航天復合材料固定速度
Transducer Frequency: 5.0 MHz
換能器的頻率：5兆赫
Measurement Update Rate: 20 Hz
測量：20 Hz更新率
Deviation alarm set points: Programmable +/- from calibration point. Set in advance setup
偏差報警設定點：可編程的+ / -從校準點。在預先設定的設置
Power Supply
電源
Battery: 3 AA alkaline or NiMH batteries
電池：3節AA堿性電池或鎳氫電池
Operating Time: 150 hours typical battery life; 30 hours continuous with backlight on
工作時間：150小時的典型電池壽命；30小時連續背光
Low Battery Indicator: Continuously indicates battery status
低電池指示器：連續指示電池狀態
Battery Saver: Auto Power Off/Continuous On
省電：自動關機/連續
AC Power Supply: Optional
交流電源可選
General
一般
Environmental IP65 compliant: Splash-proof, impact-resistant case. Sealed, color-coded keypad
環境標準：IP65防濺，耐沖擊的情況下。密封，彩色鍵盤
Operating Temperature Range: -10° C to +50° C (+14° F to 122° F)
工作溫度范圍：10°C + 50°C（14°F 122°F）
Size: (W x L x H)
尺寸（寬x長x高）
84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)
84毫米×152毫米×84毫米（3.31。x 6。×1.50。）
Weight: 0.24 kg (8.5 oz)
重量：0.24克（8.5盎司）
Standard Inclusions
標準的夾雜物
Wrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty
手腕帶，3節AA電池，5 MHz的換能器，換能器電纜，耦合劑，手提箱，橡膠保護套與頸帶，說明書，為期一年的有限保修
Optional Accessories
可選配件
USB/ADP-115: AC-115 power supply
USB / adp-115：ac-115電源
USB/ADP-230: AC-230 power supply
USB / adp-230：ac-230電源
*All specifications are subject to change without notice.
*所有規格如有變更，恕不另行通知
探頭
Olympus NDT offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications.
奧林巴斯NDT提供一個完整的選擇傳感器，電纜，耦合劑，校準試塊和配件，以滿足各種各樣的超聲波高精度厚度測量的應用。
Precision Thickness Gage Transducers
精密測厚儀傳感器
· Contact Transducers
· Delay Line
· Immersion Transducers
· Test Blocks & Cables
Precision Thickness Gage Transducers
?Contact Transducers
?接觸傳感器
?Delay Line
?延遲線
?Immersion Transducers
?浸入式換能器
?Test Blocks & Cables
?試塊和電纜
35RDC復合材料損傷檢測超聲波無損測試Olympus奧林巴斯廠家生產代理
35RDC復合材料損傷檢測超聲波無損測試Olympus奧林巴斯廠家生產代理
35RDC復合材料損傷檢測超聲波無損測試Olympus奧林巴斯廠家生產代理
35RDC復合材料損傷檢測超聲波無損測試Olympus奧林巴斯廠家生產代理
35RDC復合材料損傷檢測超聲波無損測試Olympus奧林巴斯廠家生產代理